Switch Track
RoHS Complaint Industrial Control Switches
The RoHs directive restricts the use of lead (Pb), mercury (Hg), hexavalent chromium (Hex-Cr), poly-brominated biphenyls (PBB) and polybrominated diphenyl ethers (PBDE) to maximum 1000 parts per million and cadmium to 100 ppm. The restrictions are on a homogeneous material basis, which means that they apply to any single substance that could (theoretically) be separated mechanically.
The restricted substances have traditionally found extensive usage in Industrial control switches because they impart strength, reliability and durability. These are crucial properties as the switches often operate in harsh conditions such as in boilers, etc. They are expected to have a long life and operate accurately and reliably. These restrictions have therefore been challenging to the switch industry.
While the industry has taken commendable initiatives for RoHS compliance, the efforts have neither been easy nor entirely successful thus far. This is not to detract from the sincere efforts that have been attempted. The main problem has been the availability of RoHS compliant components and parts. The majority of electronic parts available today contain at least one of the restricted substances: Pigments contain cadmium, mercury is present in infrared detectors, PBBs and PBDEs in plastics used as flame retardants, lead in solder joints and inhibited paints contain Hex-Cr. (chromium is passivated by oxygen, forming a thin protective oxide surface layer which prevents oxidation of the underlying metal. Common oxidation states are +6 i.e hexavalent chromium and +3 (i.e trivalent chromium).
A number of products have been developed to replace the banned substances. However, long term reliability, an important parameter for the switch industry, is yet to be established. Examples of such alternates are Hex-Cr, replacements such as trivalent chromium, molybdates etc. These are, however, substrate specific; in other words they require a particular type of under-coating to be applied for proper adhesion and protection, which Hex-Cr does not need. This leads to extra costs, in addition to being less flexible operationally. Similarly, lead-free solders based on tin-copper-silver alloys have been developed to replace the traditional tin-copper solder. However, concerns related to durability and reliability still remain. Lead free solders also require a higher reflow temperature. This often entails expensive process changes and retooling.
Achieving RoHS compliance is, to say the least, an arduous task for any company. This is equally true for the switch industry. The difficulties are essentially due to the requirement to meet the maximum allowable limits of the restricted substances on a homogeneous material basis. This requires the entire material flow, starting from raw material and component vendors, to the end product stage be tracked. Also included in compliance standards are consumables like labels, glue, paint etc which can sometimes introduce the undesirable substances into the end product.
An added complication for many control switch manufacturers is that clients include the military and /or aerospace sector. There is no RoHS in aerospace and products with applications that can be considered exclusively "aerospace" need not be RoHS compliant. However this poses more problems in maintaining inventory control of RoHS compliant and non-compliant products for the switch supplier.
While achieving full RoHS compliance is the ultimate goal of the industrial control switch manufacturing industry, managing the transition is the biggest current challenge.
About the Author
About Us
Go from Zero To Green In 6 Months! Click below NOW:
RoHS Directive and Recycling / Compliance Guidelines
Sandra Noble, president, Noble & Associates Consulting: I.T. Strategy Analysis/Assessments, Software Evaluation ERP/Oracle/SAP and the cure for Post Implementation Distress
Noble Finances: A/R Financing, Equipment Leasing and Lawsuit Funding
Switch Track
 |
 LGB 12260 BRASS ELECTRIC DOUBLE SLIP SWITCH TRACK NIB  US $229.99
|
 LGB 16050 16150 R3 REMOTE BRASS SWITCH TRACK SET NEW US $219.99
|
 7 manual switch track US $250.00
|
 LGB 12360 BRASS THREE WAY ELECTRIC SWITCH TRACK NIB US $179.99
|
 LGB 14805 R5 RIGHT MANUAL NICKEL PLATED SWITCH TRACK US $174.99
|
 LGB L G B DOUBLE SLIP SWITCH CROSSING TRACK BRASS NICE US $169.40
|
 LGB 18150 R5 LEFT BRASS MANUAL SWITCH TRACK NEW IN BOX US $149.99
|
 LGB 18050 R5 RIGHT BRASS MANUAL SWITCH TRACK NEW IN BOX US $149.99
|
 LGB 18050 15 R5 MANUAL BRASS SWITCH TRACK NEW IN BOX US $139.99
|
 AMS Accucraft Code 250 6 Manual Brass Track Switch US $119.95
|
 AMS Accucraft code 250 6 Manual Brass Track Switch US $114.99
|
 LGB 16150 R3 LEFT HAND REMOTE BRASS SWITCH TRACK NIB US $109.99
|
 LGB 16050 R3 RIGHT HAND REMOTE BRASS SWITCH TRACK NIB US $109.99
|
 LGB 16050 225 R3 ELECTRIC BRASS SWITCH TRACK IN BOX US $99.99
|
 Aristo Craft Extra Wide Radius Track 10 Switches NIB US $99.00
|
 LGB 14205 R1 RH ELECTRIC NICKEL PLATED SWITCH TRACK NIB US $89.99
|
 Marklin K Track Manual Double Slip Switch US $82.99
|
 LGB Lehman Switch Track Set 20902 G Scale Toy Train US $89.99
|
 BRASS TRACK SWITCH R2 LEFT HAND CODE 332 AMSQuality US $79.95
|
 Bachmann Double Oval Track LR Switches w Controler US $75.00
|
 BRASS TRACK SWITCH R2 CODE 332 G SCALE German Quality US $74.95
|
 BRASS TRACK SWITCH R2 LEFT HAND CODE 332German Quality US $74.95
|
 ARISTO CRAFT G SWITCH TRACK 30360 LEFT REMOTE US $70.00
|
 LGB MANUAL SWITCH TRACK LH 12100 NIB US $59.99
|
 G SCALE LGB RIGHT REMOTE SWITCH TRACK 16050 in Box US $56.00
|
 ARISTO CRAFT 30380 LEFT 10 DIAMETER SWITCH TRACK G US $55.00
|
Have you read this! Auto Club speedway to switch to restrictor plate track?!?
I hate the idea but I was curious to see what others think.
http://www.jayski.com/cupnews.htm#calif
I like the idea of the high banked track but no to the restrictor plates.